From: Michael Nudelman ([email protected])
Date: Wed Nov 15 2000 - 14:27:24 PST
May I ask, why?
Generally, it is not a good idea. You want to keep at least one reference solid. Either VCC ot GND.
Mike.
Dilpreet Saini wrote:
> Hi all,
> In the past I have used ferrite beads for transient and parasitic suppression of the supply (VCC) coming into the board. So far I have never used ferrite beads in series with the GND trace/plane. I was wondering do any of you have any experience using ferrite beads in that scenario.
> Thanks in advance for your help.
>
> regards,
> Dilpreet
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:08 PDT