[SI-LIST] : RGB - 15 Pin Connector Performance

From: David Haedge ([email protected])
Date: Tue Nov 14 2000 - 14:45:39 PST

• Next message: Ray Anderson: "RE: [SI-LIST] : deCoupling caps and there placement"
• Previous message: Ingraham, Andrew: "RE: [SI-LIST] : Critical Parameter: rise-time or slew-rate?"

SIers,

Anybody out there done any analysis of RGB analog signals
through a 15 pin VGA connector? Obviously the 75 ohm
coax connectors are electrically superior, but where do
the 15 pin connectors fall apart, 100MHz, 150MHz? What
actually determines "goodness"? Loss, crosstalk, crummy
picture, or what? If anybody can shed some light or
suggest resources it would be appreciated.

Regards,

David Haedge
Raytheon Company

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Ray Anderson: "RE: [SI-LIST] : deCoupling caps and there placement"
• Previous message: Ingraham, Andrew: "RE: [SI-LIST] : Critical Parameter: rise-time or slew-rate?"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:08 PDT