From: Ingraham, Andrew ([email protected])
Date: Wed Nov 08 2000 - 06:04:13 PST
> I have a question about inductor selection. I am designing a filter
> circuit to filter out noise from a power supply input to a PLL circuit. I
> want to filter out noise up to 1MHz. What should be the self resonance of
> such an inductor. The Q can be low, the application is broad band. Any
> help would be greatly appreciated.
PLLs often need very good rejection of low frequency supply noise. An LC
filter might have too high a cutoff frequency to be beneficial, and might
work better if a small resistor is substituted for (or put in series with)
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:00 PDT