RE: [SI-LIST] : PCI Bus propagation delay measurement

From: Ingraham, Andrew ([email protected])
Date: Fri Nov 03 2000 - 05:31:38 PST

• Next message: Michael Nudelman: "Re: [SI-LIST] : Noise on Ref Planes/Decoupling"
• Previous message: Golian, Alexander: "[SI-LIST] : Where to put AC coupling cap."
• Maybe in reply to: [email protected]: "[SI-LIST] : PCI Bus propagation delay measurement"
• Next in thread: Michael Nudelman: "Re: [SI-LIST] : PCI Bus propagation delay measurement"
• Reply: Michael Nudelman: "Re: [SI-LIST] : PCI Bus propagation delay measurement"

>Now, the data are output by
>transmitter on falling edge of the clock, with some delay.
 
PCI uses only the rising edge of the clock. The falling edge is not used.
Timing is cycle-to-cycle between rising edges, with no half-cycle events.

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Michael Nudelman: "Re: [SI-LIST] : Noise on Ref Planes/Decoupling"
• Previous message: Golian, Alexander: "[SI-LIST] : Where to put AC coupling cap."
• Maybe in reply to: [email protected]: "[SI-LIST] : PCI Bus propagation delay measurement"
• Next in thread: Michael Nudelman: "Re: [SI-LIST] : PCI Bus propagation delay measurement"
• Reply: Michael Nudelman: "Re: [SI-LIST] : PCI Bus propagation delay measurement"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:58 PDT