[SI-LIST] : ESD testing

About this list Date view Thread view Subject view Author view

From: Chetverov Vladimir ([email protected])
Date: Thu Nov 02 2000 - 23:19:04 PST


Hi SI-List!

    Standards for ESD test such as SAE J1113/13, SAE J551/15,
ISO 10605 describes height of insulation blocks.
But I can't find any information about number of this blocks.
    We have a problem. Device we tested had failure when testing with using
one insulation block.
Our employer persists that we must use four this blocks.

Q: Where I can find standard or any other document which describes number of
blocks?

Best regards,
    Chetverov Vladimir.

P.S. Sorry for my English.

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:58 PDT