[SI-LIST] : PCI Bus propagation delay measurement

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Thu Nov 02 2000 - 08:43:53 PST


Hi SI people,

When measuring a real PCI bus signal (not 25ohm test load);
Would the starting point of Tprop be for a rising
edge in this case at 0.285Vcc?

Why Tprop isn't measured like in a TDR for example?

Could this be possible in a 'known' system;
I would know exactly which PCI devices are going to be
connected to the bus.
I would have for example;
clock skew of 2ns
setup time 2ns
Tval 2ns

Would Tprop of 24ns in this case be possible
for a 33MHz system?

Br,
Marko

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:58 PDT