RE: [SI-LIST] : differential impedance calculations

About this list Date view Thread view Subject view Author view

From: Larry Miller ([email protected])
Date: Wed Nov 01 2000 - 14:04:55 PST


Unfortunately, the piece by Dr Bogatin makes and refers to the very
assumptions that Dr Johnson refers to.
All roads lead to the National App Note AN-905.
(I have been battling this same fight myself.)

Larry Miller

> -----Original Message-----
> From: Charles Grasso [SMTP:[email protected]]
> Sent: Wednesday, November 01, 2000 2:23 PM
> To: Gary Peterson; si-list
> Cc: eric
> Subject: Re: [SI-LIST] : differential impedance calculations
>
> Hello - There is an excellent presentation available for download called
> "Differential Impedance finally made Simple" authored by Dr Bogatin that
> should help answer this question.
>
> Please goto http://www.ewh.ieee.org/rmcemc Click on Last Meeting and
> follow the instructions for the presentation download.
>
> Enjoy!!
>
> Charles Grasso
> Ansoft Corporartion
> p: 303-666-1400
> f: 303-666-1499
> ----- Original Message -----
> From: "Gary Peterson" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, November 01, 2000 12:50 PM
> Subject: [SI-LIST] : differential impedance calculations
>
>
> >
> >
> > I seem to recall Dr. Howard Johnson mentioning that impedance
> calculation
> > formulas made assumptions (since closed-form solutions aren't possible).
> >
> > Can someone comment on assumptions made for the equation for
> differential
> > impedance shown below? Seems to me that as traces get closer together,
> the
> > single ended impedance would be affected. When I calculate single-point
> > values for differential impedance using Hyperlynx LineSim, I do see the
> > single-ended impedance change when the spacing between the pair gets
> small.
> >
> > Thanks,
> >
> > Gary Peterson
> >
> >
> >
> > (Embedded image moved to file: pic27894.pcx)
> >
> >
>
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:57 PDT