From: yaserh ([email protected])
Date: Tue Oct 31 2000 - 22:26:45 PST
Hi,
I have problem with a circuit i have designed uses a linear power supply with a transformer 220-12 VAC 1A , when i measure on any point on the circuit with respect to the earth point i found 110 VAC on the scope. I need to know why i see this 110 VAC or this is due to the transformer interwinding capactance, if it's so how i can remove this signal from my circuit. I think that this is a common mode signal.
Waiiting your reply
With my best regards
Yasser El-haddad
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:56 PDT