RE: [SI-LIST] : Decoupling caps selection

From: Bill Owsley ([email protected])
Date: Tue Oct 31 2000 - 07:40:03 PST

• Next message: Ken Cantrell: "RE: [SI-LIST] : Parallel single-ended traces routed to achieve 35 Ohm controlledimpedance"
• Previous message: Perry Qu: "Re: [SI-LIST] : Possible TDR microstrip measurement error?"
• In reply to: [email protected]: "RE: [SI-LIST] : Decoupling caps selection"
• Next in thread: Hall, Stephen H: "RE: [SI-LIST] : Decoupling caps selection"

use the most common and time proven method available with todays technology
and good for all time - the SWAG method...
and it's so easy too... tho' it works best today and on 4/1.

At 06:22 AM 10/31/2000 -0500, [email protected] wrote:

>How do you determine the transient current of an IC? (step 2 below)
>
>
>2. Estimate the transient current that will be flow through the capacitor.
>This is deltaI.
excavated
----------------------------
Bill Owsley, [email protected]
919) 392-8341

TMBU Compliance
Cisco Systems
7025 Kit Creek Road
POB 14987
RTP. NC. 27709

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Ken Cantrell: "RE: [SI-LIST] : Parallel single-ended traces routed to achieve 35 Ohm controlledimpedance"
• Previous message: Perry Qu: "Re: [SI-LIST] : Possible TDR microstrip measurement error?"
• In reply to: [email protected]: "RE: [SI-LIST] : Decoupling caps selection"
• Next in thread: Hall, Stephen H: "RE: [SI-LIST] : Decoupling caps selection"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:54 PDT