RE: [SI-LIST] : Best copper fill pattern

From: Gaboian, Jerry ([email protected])
Date: Fri Oct 27 2000 - 11:43:30 PDT

• Next message: [email protected]: "[SI-LIST] : Parallel single-ended traces routed to achieve 35 Ohm controlled impedance"
• Previous message: George Borkowicz: "[SI-LIST] : Best coppper fill pattern"

George,
 
I have had several boards built with 0.10 in x 0.10 in grids and got
excellent results for impedance control...
 
Those dimensions will probably vary with each fab house you ask... it is
only an opinion but it work fine for me...
 
Regards,
Jerry Gaboian
 

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: [email protected]: "[SI-LIST] : Parallel single-ended traces routed to achieve 35 Ohm controlled impedance"
• Previous message: George Borkowicz: "[SI-LIST] : Best coppper fill pattern"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:52 PDT