RE: [SI-LIST] : ferrite bead model

About this list Date view Thread view Subject view Author view

From: John Phillips ([email protected])
Date: Fri Oct 20 2000 - 04:50:43 PDT


Joan,

Try :-

http://www.orcad.com/technical/library/schematic/contentpage/tn/tn106.htm

John

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Joan Vicent Castell Balaguer
Sent: 20 October 2000 13:07
To: [email protected]
Subject: [SI-LIST] : ferrite bead model

Hi,
I don't know how to model a ferrite bead (resistence variing whith frequency) in
PSPICE (an old MSDOS version) to do a filter response frequency sweep. Can
anybody helpme?

O O O Joan Vicent Castell Balaguer
O O O UPC University (Catalonia)
O O O Tel: 93.896.77.75
U P C e-mail: [email protected]
Subjects: Signal Transmision & Signal Integrity.
            Electromagnetic Compatibility.
  **** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE si-list or
UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are
accessible at http://www.qsl.net/wb6tpu ****
__________________________________________________
Virus checked by MessageLabs Virus Control Centre.

__________________________________________________
Virus checked by MessageLabs Virus Control Centre.

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:48 PDT