Re: [SI-LIST] : 2.5Gbps across a backplane?

About this list Date view Thread view Subject view Author view

From: GARY ROSEN ([email protected])
Date: Mon Oct 16 2000 - 09:33:52 PDT

I had never heard the term before this thread either. It seems
obvious that you would get stronger coupling from broadside
than from edge-coupled (depending on layer thickness), right?
Are there any second-order effects to be aware of?

- Gary Rosen

Brad Underwood wrote:

> Broadside coupling is when diff pair traces are run parallel on adjacent
> signal layers.
>
> As in....
>
> --------------- Reference
> ----- Sig T
> ----- Sig F
> --------------- Reference
>
> Regards
>
> Brad
>
> ....................................................
> Brad Underwood
> Hardware Engineer phone: (469) 330-1765
> Metera Networks, Inc. cell: (214) 642-0769
> 1202 Richardson Dr, Suit 100 fax: (469) 330-1762
> Richardson, Tx 75080
>
> [email protected] wrote:
> >
> > Someone please explain broadside coupling to me.
> > Richard Ellison
> >
> > **** To unsubscribe from si-list or si-list-digest: send e-mail to
> > [email protected]. In the BODY of message put: UNSUBSCRIBE
> > si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> > si-list archives are accessible at http://www.qsl.net/wb6tpu
> > ****
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****


**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:46 PDT