Re: [SI-LIST] : Ethernet analyzer

From: Stefan Ludwig ([email protected])
Date: Thu Oct 05 2000 - 11:51:41 PDT

• Next message: [email protected]: "RE: [SI-LIST] : Ethernet analyzer"
• Previous message: Chris Rokusek: "RE: [SI-LIST] : FW: Spectraquest Vs. XTK/XNS"
• In reply to: Chris Hansen: "[SI-LIST] : Ethernet analyzer"
• Next in thread: [email protected]: "RE: [SI-LIST] : Ethernet analyzer"

The SmartBits 200 chassis with appropriate line card from Netcom
Systems is very useful. The software runs on the PC and hooks up to
the analyzer via serial or Ethernet. They sell or rent out the
equipment.

http://www.netcomsystems.com

Good luck!

Stefan Ludwig

Chris Hansen wrote:

>
>
> Can anyone recommend an analyzer for 10/100 Ethernet, software for
> Windows, or hardware stand alone, that can provide Bit Error Rate,
> or other link status that could be used to debug a performance
> problem with a 10/100 design?
>
> Thank you,
> Chris Hansen
> Director of Hardware Development
>
> StorLogic
> 100 Technology Park, Suite 175
> Lake Mary, Florida 32746-6926
> Tel: (407) 333 9998 x242
> Fax: (407) 333 4448
>
> mailto:[email protected]
> www.storlogic.com

• text/x-vcard attachment: Card for Stefan Ludwig

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: [email protected]: "RE: [SI-LIST] : Ethernet analyzer"
• Previous message: Chris Rokusek: "RE: [SI-LIST] : FW: Spectraquest Vs. XTK/XNS"
• In reply to: Chris Hansen: "[SI-LIST] : Ethernet analyzer"
• Next in thread: [email protected]: "RE: [SI-LIST] : Ethernet analyzer"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:40 PDT