Re: [SI-LIST] : inductor

About this list Date view Thread view Subject view Author view

From: Charles Grasso ([email protected])
Date: Thu Sep 28 2000 - 08:36:21 PDT

I most certainly would not recommend that. Add the correct termination
and watch the ringing disappear! The inductor will add delay and more than
likely exacerbate the ringing.

I know that some folks add ferrites in place of series resistors and I would
like
to have a discussion on that. Comments?
----- Original Message -----
From: "KokTongTHAM" <[email protected]>
To: <[email protected]>
Sent: Thursday, September 28, 2000 3:07 AM
Subject: [SI-LIST] : inductor

> SI Gurus,
>
> I have told by an EMI engineer about using inductors can reduce ringing of
> a transmission line effectively instead of series resistor. Can anyone
> tell if this is true?
> As far as I know, inductor can act as a filter to cut unwanted harmonnics.
> How do we chose the suitable value for the inductor?
>
> Thanks.
>
> Regards,
> KTTHAM
>
>
>
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:36 PDT