Re: [SI-LIST] : Simulation of differential lines in XTK

From: Vinu Arumugham ([email protected])
Date: Fri Aug 25 2000 - 09:12:40 PDT

• Next message: Guy de Burgh: "Re: [SI-LIST] : Simulation of differential lines in XTK"
• Previous message: Fabrice BOISSIERES: "[SI-LIST] : cable model for UDMA and USB"
• In reply to: selvaraj subramanian : "[SI-LIST] : Simulation of differential lines in XTK"
• Next in thread: Guy de Burgh: "Re: [SI-LIST] : Simulation of differential lines in XTK"

I think you have to use the SERIES and CONNECT_NODE statements.

Vinu

selvaraj subramanian wrote:

> Hello, If anybody there knows how to simulate a (LVDS) differential
> signalling in XTK, let me know. I know how to connect differential
> drivers and differential receivers in XTK. But what I want to know is
> how can I write the topology file if that 100ohms resistor( a must for
> the LVDS signals near the receiver) is present in the topology. thanks
> & regards,Selva

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Guy de Burgh: "Re: [SI-LIST] : Simulation of differential lines in XTK"
• Previous message: Fabrice BOISSIERES: "[SI-LIST] : cable model for UDMA and USB"
• In reply to: selvaraj subramanian : "[SI-LIST] : Simulation of differential lines in XTK"
• Next in thread: Guy de Burgh: "Re: [SI-LIST] : Simulation of differential lines in XTK"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:20 PDT