From: [email protected]
Date: Thu Aug 24 2000 - 10:34:50 PDT
Muhammad,
You may also want to send this request to the IBIS users reflector at
[email protected] <mailto:[email protected]>
Aubrey Sparkman
Signal Integrity
[email protected]
(512) 723-3592
-----Original Message-----
From: Muhammad S. Sagarwala [mailto:[email protected]]
Sent: Thursday, August 24, 2000 12:11 PM
To: [email protected]
Subject: [SI-LIST] : Make Ibis models for ECL devices...
Hello
My name is Muhammad. I have been trying to make Ibis models for a few
Motorola ECL devices using the Spice Development Kit
on the motorola web site. These are differential devices having
differential inputs and outputs.
While generating the data for the power and ground clamp for input side, I
connected one input to VBB as described in the spice development kit and
connected
the other input to the swept voltage source. The VBB as specified in the
spice development kit is -1.325 (assuming VCC=0 and VEE=-5.2). Since I am
using VCC=2 and VEE=-3.2, I changed the value of VBB to 0.675. Is this the
right thing to do or am I overlooking something???
Secondly, I was trying to generate the VT curves for the output. The
Motorola device is a Fanout Buffer. I don't know what input should I
provide to the input of the output
buffer. Can I use a generic pulse signal with a risetime that would be
close to the real signal or should I change/degrade the risetime. Does
anybody have any idea...
I would really appreiciate if somebody could help me out with this...
Cheers,
Muhammad
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:20 PDT