[SI-LIST] : Guard band for differential signals

From: Ravi Kiran ([email protected])
Date: Wed Jul 26 2000 - 17:23:39 PDT

• Next message: [email protected]: "RE: [SI-LIST] : Heat sink and radiated emissions"
• Previous message: Ray Anderson: "RE: [SI-LIST] : Stub Capacitance calculation"
• Next in thread: [email protected]: "Re: [SI-LIST] : Guard band for differential signals"
• Maybe reply: [email protected]: "Re: [SI-LIST] : Guard band for differential signals"
• Reply: Bryan Ackerly: "[SI-LIST] : An ecellent source of EMC articles"

Hi,

Is it advisable to provide ground guard band for differential signals?
What will be the effect of guard band for differential signals?

Thanks
Ravi Kiran 1-650-625-2225
Member Technical staff
Nokia IP Routing Group
313 Fairchild Drive
Mountain View, CA 94043

• text/x-vcard attachment: Card for Ravi Kiran

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: [email protected]: "RE: [SI-LIST] : Heat sink and radiated emissions"
• Previous message: Ray Anderson: "RE: [SI-LIST] : Stub Capacitance calculation"
• Next in thread: [email protected]: "Re: [SI-LIST] : Guard band for differential signals"
• Maybe reply: [email protected]: "Re: [SI-LIST] : Guard band for differential signals"
• Reply: Bryan Ackerly: "[SI-LIST] : An ecellent source of EMC articles"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:52 PST