[SI-LIST] : broadside differntial pairs

From: Sean Murray ([email protected])
Date: Mon Jul 24 2000 - 13:22:47 PDT

• Next message: Zabinski, Patrick J.: "RE: [SI-LIST] : Urgent help needed on HSPICE simulation"
• Previous message: Perry Qu: "[SI-LIST] : Urgent help needed on HSPICE simulation"
• Next in thread: Mike Ventham: "Re: [SI-LIST] : broadside differntial pairs"
• Reply: Mike Ventham: "Re: [SI-LIST] : broadside differntial pairs"

Looking for what would give me 100 ohms Zod on the following

Trace width .008 (both signal layers)
Dk=3.9
Copper weight=1 oz.
Coupling = as close to 10% as possible.

I have tried Polar and it seems to give me numbers that don't correlate to
what I actually used on my board.

Regards,
Sean Murray
General Manager
 
M&M Specialties Inc.
1236 W. Southern Ave. #106
Tempe, AZ. 85282-4518
Phone: (480) 858-0393 x105
Cell: (602) 684-7859
Fax: (480) 858-1882
Email: [email protected]
WWW.mmspec.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Zabinski, Patrick J.: "RE: [SI-LIST] : Urgent help needed on HSPICE simulation"
• Previous message: Perry Qu: "[SI-LIST] : Urgent help needed on HSPICE simulation"
• Next in thread: Mike Ventham: "Re: [SI-LIST] : broadside differntial pairs"
• Reply: Mike Ventham: "Re: [SI-LIST] : broadside differntial pairs"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:51 PST