[SI-LIST] : Split power plane

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Wed Jun 28 2000 - 08:00:36 PDT

Hi,

We have a design with 4 different Power and 2 Grounds.
We plan to put all 4 Power and AGND in one plan - layer 2 (close to DGND
plan - layer 3).
Hi-Speed Signals ( Rise time of 150 ps) are routed in other layers as strip
lines.

We would like to know:
Is there any limitation/ recommendations to the gap between the power
areas?
Do you recommend any "filter" between power areas?
Do you recommend any "filter" between power areas and AGND?
What should be the minimum thickness between the Power plane and layer1?
What should be the minimum thickness between the Power plane and layer 3?

Thanks

Yosi Zangiri
Design & Manufacturing Technologies
ECI Telecom
mailto:[email protected]
Phone: +972-3-926 8235

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:44 PST