RE: [SI-LIST] : Guard traces

From: Chris Cheng ([email protected])
Date: Fri Jun 23 2000 - 15:17:44 PDT

• Next message: Martyn Gaudion: "Re: [SI-LIST] : Offset stripline"
• Previous message: John Draut: "RE: [SI-LIST] : Signal Integrity Conferences"
• Maybe in reply to: Sean Murray: "[SI-LIST] : Guard traces"

i am lost in the emi comment, can someone explain ?
i am also lost in the stripline comment, are you saying
you cannot have signal coupling to ground in microstrip ?

-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, June 21, 2000 8:23 PM
To: [email protected]; [email protected]
Subject: RE: [SI-LIST] : Guard traces

Tadashi,

From signal integrity perspective, your guard traces are fine. From EMI
perspective, at 1 GHz, you might have problems. The guard traces provide
greater mutual inductance between the signal trace and ground. But you will
not have perfect coupling (between signal and ground) until the signal
traces are placed between copper planes (stripline).

Regards,

George Tang

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Martyn Gaudion: "Re: [SI-LIST] : Offset stripline"
• Previous message: John Draut: "RE: [SI-LIST] : Signal Integrity Conferences"
• Maybe in reply to: Sean Murray: "[SI-LIST] : Guard traces"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:44 PST