[SI-LIST] : Eye Diagrams ...

From: Doug McKean ([email protected])
Date: Mon Jun 12 2000 - 14:28:12 PDT

• Next message: Larry Miller: "RE: [SI-LIST] : DIFF PAIRS"
• Previous message: Daniel Lischinsky: "[SI-LIST] : Mictor connector terminations"
• Next in thread: Larry Miller: "RE: [SI-LIST] : Eye Diagrams ..."
• Maybe reply: Larry Miller: "RE: [SI-LIST] : Eye Diagrams ..."

Just curious ...

They provide a lot of information - jitter,
sensitivity to timing error, worst case margin,
threshold tolerance, etc ...

Are they used extensively in signal integrity?

When I was in telco, they were used as a regular
part of design.

- Doug

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Larry Miller: "RE: [SI-LIST] : DIFF PAIRS"
• Previous message: Daniel Lischinsky: "[SI-LIST] : Mictor connector terminations"
• Next in thread: Larry Miller: "RE: [SI-LIST] : Eye Diagrams ..."
• Maybe reply: Larry Miller: "RE: [SI-LIST] : Eye Diagrams ..."

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:35 PST