From: Clewell, Craig W ([email protected])
Date: Tue May 30 2000 - 07:06:50 PDT
Sean,
There is a book (it's a horrible book don't buy it) from Lee Ritchey and
James Blankenhorn called "High Speed PCB Design" that has a graph of the 2
materials plotted against frequency. You can contact them at 408-438-6116
and maybe get a copy of the page (42). The book is really bad (index
doesn't match the actual page numbers, errors all over the place, etc...),
but they may be able to send you a copy of the chart, or answer you question
directly.
Craig
-----Original Message-----
From: Sean Murray [mailto:[email protected]]
Sent: Thursday, May 25, 2000 2:33 PM
To: [email protected]
Subject: [SI-LIST] : Getek vs. CE
All,
Does anyone have any literature or Data showing the differences
between CE and Getek at different frequencies. I am more interested in data
that pertains to the same application such as a ATE board where the same
design was built using both CE and Getek. There seems to be 2 sides, with
one saying Getek outperforms CE at higher speeds and the other CE is better
for higher speed parts. The application in question will be running at
speeds above 400 mhz.
Regards,
Sean Murray
General Manager
M&M Specialties Inc.
1236 W. Southern Ave. #106
Tempe, AZ. 85282-4518
Phone: (480) 858-0393 x105
Cell: (602) 684-7859
Fax: (480) 858-1882
Email: [email protected]
WWW.mmspec.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:29 PST