From: Ron Miller ([email protected])
Date: Fri Apr 28 2000 - 10:01:55 PDT
Hi Sean
I have done some work substituting Arlon 350(teflon with ceramic loading)
for FR4 and have
been able to double the bandwidth of previous generations. Going from FR4
to Getek will
not get you much, but if you go to Nelco 4000-13SI, you can expect a big
improvement in
the frequency dependent losses.
Good luck
Ron Miller
> -----Original Message-----
> From: Sean Murray
> Sent: Friday, April 28, 2000 7:58 AM
> To: '[email protected]'
> Subject: [SI-LIST] : RF boards
> Importance: High
>
> Anyone have any feelings on what subtle differences when fabricating a
> board can do to an RF board. Such as going from FR-4 to Getek; 50/200
> gold/nickle vs. 30/100 gold/nickle. Is there any books out there that
> deal with strictly the layout of RF boards??
>
> Regards,
> Sean Murray
> Sales Manager
>
> M&M Specialties Inc.
> 1236 W. Southern Ave. #106
> Tempe, AZ. 85282-4518
> Phone: (480) 858-0393 x105
> Cell: (602) 684-7859
> Fax: (480) 858-1882
> Email: [email protected]
> WWW.mmspec.com
>
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:08 PST