Re: [SI-LIST] : ribbon cable models

From: Ray Anderson ([email protected])
Date: Thu Mar 09 2000 - 14:23:45 PST

• Next message: [email protected]: "Re: [SI-LIST] : why .062?"
• Previous message: qzhao: "[SI-LIST] : Job opening at Cisco"
• Maybe in reply to: Rehm, Dennis: "[SI-LIST] : ribbon cable models"
• Next in thread: Tadashi ARAI: "Re: [SI-LIST] : ribbon cable models"

> Does anyone know where I can get ribbon cable models for the cheap ribbon
> cables that are used for ATA interconnect? these can be single ended models
> but I would want crosstalk terms. I would also need connector models if
> available anywhere
>
> Thanks
>
> Dennis
>
>

You can synthesize spice models for this application using a 2D modeler
like ApsimRLGC or Ansoft Maxwell or others.

-Ray

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: [email protected]: "Re: [SI-LIST] : why .062?"
• Previous message: qzhao: "[SI-LIST] : Job opening at Cisco"
• Maybe in reply to: Rehm, Dennis: "[SI-LIST] : ribbon cable models"
• Next in thread: Tadashi ARAI: "Re: [SI-LIST] : ribbon cable models"

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:31 PDT