From: Shayle Hirschman ([email protected])
Date: Tue Mar 07 2000 - 10:20:37 PST
I have been asked to sprinkle 6.8 uF tantalum or electrolytic capacitors
evenly around the PC board of a new design.
As usual, I have the 0.1 uF 805 ceramics at the power pins of chips and a
bulk storage cap. of 47 uF where power enters. The board is 3x4 inches, has
a few chips, slow edge rates. Mainly RS-232 (up to 1 mb/s) and the
internals of a PLD clocked at 16 MHz.
Can anyone tell me what the benefit of these 6.8 tantalums sprinkled around
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:21 PDT