From: Roy Leventhal ([email protected])
Date: Mon Feb 21 2000 - 07:56:53 PST
I read your reply with a great amount of interest an a predisposition to the
same point of view. But, since you can quote from before/after experience and I
cannot, what are your observations on time-to-market of the two methods
(rules-based Vs simulation-based)? Particularly:
1. Early in coming up the learning curve of making simulation an intregal part
of the design process Vs later when you understand what to do in detail?
2. On projects where you are looking to produce a board with reduced
functionality as early as possible Vs full functionality later?
3. What are your views of the combining the best of rules-based design plus
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:07 PDT