Re: [SI-LIST] : ESR and bypass caps

From: Larry Smith ([email protected])
Date: Mon Feb 07 2000 - 09:39:10 PST

• Next message: Larry Smith: "Re: [SI-LIST] : ESR and bypass caps"
• Previous message: John Phillips: "RE: [SI-LIST] : ESR and bypass caps"
• Maybe in reply to: Doug Brooks: "[SI-LIST] : ESR and bypass caps"
• Next in thread: Larry Smith: "Re: [SI-LIST] : ESR and bypass caps"

Check out the papers at:

        http://www.qsl.net/wb6tpu/si_documents/docs.html
        
Two of the papers have detailed discussion of decoupling capaictor
pad inductance complete with illustrations.

regards,
Larry Smith
Sun Microsystms

> From: [email protected]
> Date: Mon, 7 Feb 2000 08:22:07 -0600
>
> Larry Smith wrote:
>
> > ... The higher the resonant frequency, the more important it
> > is to have low inductance pads. ...
>
>
> Larry, do you or any body else have a link to a drawing
> showing a good low inductance connection for bypass caps?

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Larry Smith: "Re: [SI-LIST] : ESR and bypass caps"
• Previous message: John Phillips: "RE: [SI-LIST] : ESR and bypass caps"
• Maybe in reply to: Doug Brooks: "[SI-LIST] : ESR and bypass caps"
• Next in thread: Larry Smith: "Re: [SI-LIST] : ESR and bypass caps"

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:00 PDT