From: Ingraham, Andrew ([email protected])
Date: Thu Jan 06 2000 - 12:56:07 PST
Adding to what D. C. Sessions already wrote....
>Doesn't the 5V spec also have a clamp requirement?
>It is just a clamp to 5V.
No, the "high" clamp is optional in the 5V spec. Only the clamp below
ground is required.
>Just curious about how many preople have seen high side
>ringing problems with 5V tolerant universal buffers in
>a 5V system becuase it drives to 3.3 but the bus clamps at 5V.
Whether the clamp is there or not, ringing can happen that never hits the
clamp.
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:28 PDT