From: Krull, Nick J ([email protected])
Date: Tue Nov 16 1999 - 11:33:32 PST
you missed one
cumbersome, slow, if not impossible, setup of a board level simulations...
Nick Krull, STK/Applied Electronics
-----Original Message-----
From: Scott McMorrow [mailto:[email protected]]
Sent: Tuesday, November 16, 1999 12:09 PM
To: [email protected]
Subject: Re: [SI-LIST] : IBIS datasheets for PCI and DDR
Chris Cheng wrote:
<http://www.micron.com/mti/msp/models/index.html>
spice only for DDR i/o but then again, why do
u need ibis if u have the full spice......
Lets see ...
Faster performance in simulation by 10-100X ...
Encapsulation of standard measurement points ...
Encapsulation of package parameters ...
Equivalent or better accuracy depending on method of
creating and characterizing the model ...
More widespread simulator support.
Hmmm ... I can't imagine what the need or desire for
IBIS models would be.
regards,
scott
-- Scott McMorrow Principal Engineer SiQual, Signal Quality Engineering 18735 SW Boones Ferry Road Tualatin, OR 97062-3090 (503) 885-1231 http://www.siqual.com <http://www.siqual.com>**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:50 PST