[SI-LIST] : Impedance calculator

About this list Date view Thread view Subject view Author view

From: Chao-tung Yang ([email protected])
Date: Tue Nov 09 1999 - 15:50:23 PST

Dear All,

Most of the impedance calculation softwares only calculate the
impedance of straight line without through hole or via. But in
a backplane, there are lots of through holes along with the lines.
Obviously, these through holes will reduce the impedance of the line.

Does any one know any tool or method which can calculate the
impedance of a line with vias?

Thanks,
CT Yang
ADLink Technology, Inc.

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:44 PST