Re: [SI-LIST] : IBIS Models

From: [email protected]
Date: Fri Nov 05 1999 - 07:06:17 PST

• Next message: Mandl Martin: "Re: [SI-LIST] : Recommendations for High Density PCB to PCB Connection"
• Previous message: Craig Callen: "RE: [SI-LIST] : [Fwd: Majordomo results: Looking for highspeedbuffer parts]"
• In reply to: Stephen Peters: "Re: [SI-LIST] : IBIS Models"
• Next in thread: Chris Cheng: "RE: [SI-LIST] : IBIS Models"

Many (good) IBIS models specify the TEMP range at which the MIN TYP and
MAX models were made. The models should be accurate for that specific
corner. If you need finer control, you will have to use SPICE models.

regards,
Jon Powel
IBIS Librarian

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

• Next message: Mandl Martin: "Re: [SI-LIST] : Recommendations for High Density PCB to PCB Connection"
• Previous message: Craig Callen: "RE: [SI-LIST] : [Fwd: Majordomo results: Looking for highspeedbuffer parts]"
• In reply to: Stephen Peters: "Re: [SI-LIST] : IBIS Models"
• Next in thread: Chris Cheng: "RE: [SI-LIST] : IBIS Models"

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:38 PST