Re: [SI-LIST] : Recommendations for High Density PCB to PCB Connection

About this list Date view Thread view Subject view Author view

From: Adrian Shiner ([email protected])
Date: Wed Nov 03 1999 - 10:13:08 PST

Beware of crosstalk....... flexible printed circuit is the immediate
thought. Can't you use the whole perimeter of both boards if space volume is
at a premium?

Nice guy, your System Designer

"Keep it simple stupid", otherwise known as KISS comes to mind.

Good luck

Adrian

----- Original Message -----
From: Doug Piper <[email protected]>
To: <[email protected]>
Sent: 03 November 1999 04:07
Subject: [SI-LIST] : Recommendations for High Density PCB to PCB Connection

> I'm working on a new project that requires me to make 40 connections from
> one PCB to another in a space that's only about 0.2" x 0.5". Does anyone
> have any experience or recommendations for making a connection of this
> density?
>
> Doug Piper, Woven Electronics, P.O. Box 189, Mauldin, SC 29662
> PH 864-967-1751, FAX 864-963-1761, e-mail: [email protected]
> www.wovenelectronics.com
>
>
> **** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
http://www.qsl.net/wb6tpu/si-list ****
>

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:33 PST