RE: [SI-LIST] : Recommendations for High Density PCB to PCB Conne ction

About this list Date view Thread view Subject view Author view

From: Krull, Nick J ([email protected])
Date: Wed Nov 03 1999 - 07:08:42 PST

You could try Amps Mictor Connector. I'm not sure of the exact physical
size, but its
worth a look see. Nick Krull

-----Original Message-----
From: Doug Piper [mailto:[email protected]]
Sent: Tuesday, November 02, 1999 9:07 PM
To: [email protected]
Subject: [SI-LIST] : Recommendations for High Density PCB to PCB
Connection

I'm working on a new project that requires me to make 40 connections from
one PCB to another in a space that's only about 0.2" x 0.5". Does anyone
have any experience or recommendations for making a connection of this
density?

Doug Piper, Woven Electronics, P.O. Box 189, Mauldin, SC 29662
PH 864-967-1751, FAX 864-963-1761, e-mail: [email protected]
www.wovenelectronics.com

**** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:32 PST