Re: [SI-LIST] : quad offset stripline?

About this list Date view Thread view Subject view Author view

From: Pat Zabinski ([email protected])
Date: Thu Oct 28 1999 - 07:17:03 PDT


Yes, they are full-swing, single-ended, 2.5 V CMOS signals. Source-series
terminated such that the drivers are designed with a 50 ohm
equivalent output resistance on rising and falling edges.

The line widths are 4 and 5 mils (outer-most and inner-most layers).

>
> Are you processing single ended tlines?. Be careful of the mode effects.
 What
> line widths?
> The small line widths work better for this type of construction than larger
[7
> mil or > are considered larger].
>

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:23 PST