Re: [SI-LIST] : quad offset stripline?

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Thu Oct 28 1999 - 06:34:18 PDT


Are you processing single ended tlines?. Be careful of the mode effects. What
line widths?
The small line widths work better for this type of construction than larger [7
mil or > are considered larger].

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:23 PST