From: Doug Brooks ([email protected])
Date: Thu Dec 30 1999 - 09:45:38 PST
As I recall, there is a relationship between a hole in a chassis and the
frequencies that can pass through that opening. I recall that the longest
dimension of the hole defines the wavelength, or quarter wavelength, or
something, of the lowest frequency than can conveniently enter or escape
through the opening.
Can anyone give me the correct relationship?
Thanks.
And Happy New Year to All...........
Doug Brooks
and all of us here at UltraCAD
.
************************************************************
See our updated message re in-house seminars on our web page
.
Doug Brooks, President [email protected]
UltraCAD Design, Inc. http://www.ultracad.com
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:15 PST