From: Jim Freeman ([email protected])
Date: Fri Dec 17 1999 - 15:44:17 PST
Hi dan,
OptEM has such an animal and they pride themselves on it's accuracy.
Jim Freeman
Dan Bostan wrote:
> Milt,
>
> Do you know by any chance where may I find a differential impedance
> calculator?
> Thank you.
>
> Dan Bostan
> Engineer
> Corvia Networks e-mail: [email protected]
> 212 Gibraltar Dr. ph: 408.752.0550/x111
> Sunnyvale, CA 94089 fax: 408.752.0551
>
> ----- Original Message -----
> From: Milt Schwartz x3261 <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, December 15, 1999 3:06 PM
> Subject: Re: [SI-LIST] : Physcially-small far-end LVDS terminations?
>
> > Eric,
> > You only need one resistor (typ 100 ohms) between the differential driver
> Pair.
> > The resistor should be equal to the differential impedance of the driver
> traces.
> > The LVDS Driver can be used with resistor values from 90 to 120 ohms and
> provide the specified VOC.
> > The manufacturers use split resistors so the VOS specification in TIA/EIA
> 644 can be monitored.
> >
> > regards milt
> >
> > Milt Schwartz
> > National Semiconductor
> > Interface Applications.
> >
> > **** To unsubscribe from si-list: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list, for more help, put HELP.
> > si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
> > ****
> >
> >
>
> **** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
> ****
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:09 PST