L approx. = 5*ln(2*Pi*h/w)
where L = nH/in
w, h in mils (trace width and height above plane, resp.)
Pi = 3.14159
ln = natural log
Thus 10 mil wide trace 10 mil above plane is approx
9.2 nH/in (according to this approx)
Hope this helps
Doug Brooks
At 02:06 PM 11/24/98 -0800, you wrote:
>
>What is the formula for calculating the
>inductance/inch of a microstrip Cu trace?
>
>Regards, Doug
>
>
>**** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
http://www.qsl.net/wb6tpu/si-list ****
>
>
>
.
****************************************************
Doug Brooks, President [email protected]
UltraCAD Design, Inc. http://www.ultracad.com
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****