Re: [SI-LIST] : Calculating Trace Inductance

Danwei Xue ([email protected])
Tue, 24 Nov 1998 16:41:32 -0800

If you know the characteristic impedance Z0 (Ohm) and the propagation delay D (second/meter)
of the trace, then the inductance per unit length L (Henry/meter) of the trace is

L = D * Z0 (H/m)

Hope this is what you want.

Danwei

Douglas McKean wrote:

> What is the formula for calculating the
> inductance/inch of a microstrip Cu trace?
>
> Regards, Doug
>
> **** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****