Re: [SI-LIST] : Surface Mount Cap Lead Inductance

Brett Grossman ([email protected])
Tue, 11 Aug 1998 10:14:55 -0700

Mike,

Check out the data sheets available from Kemet's web page.

http://www.kemet.com/

I believe that they have some references that may help answer your
question.

Another usually helpful source would be the AVX page:

http://www.avxcorp.com/

Hope that this helps,

-Brett

> Da: Mike Mayer[SMTP:[email protected]]
> Inviato: luned=EC 20 luglio 1998 22.40
> A: [email protected]
> Oggetto: [SI-LIST] : Surface Mount Cap Lead Inductance
>=20
> I was looking at a note from howard Johnson about decoupling ("Bypass
> Multi-Valued Arrays"):
>=20
> http://www.sigcon.com/news/1_17.htm
>=20
> I started looking into it but can't seem to find any information on
> lead inductance for surface mount packages, especially the types used
> by tantalum caps (7343, 6032, etc.). Has anyone seen a source for this
> information?
>=20
> --=20
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D
> Mike Mayer Artesyn Communication
> Products, Inc
> Madison, WI
> http://www.artesyn.com/cp
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D
--=20
------------------------------------------------------------------------
Brett Grossman __ ___ =20
Intel Tooling Operations __ /\ \__ /\_ \ =20
Phone: 408-765-2619 /\_\ ___\ \ ,_\ \//\ \ =20
Fax: 408-765-2518 \/\ \ /' _ `\ \ \/ __ \ \ \=09
email: [email protected] \ \ \/\ \/\ \ \ \_ /'__`\\_\ \_
\ \_\ \_\ \_\ \__/\ __//\____\=20
\/_/\/_/\/_/\/__\ \____\/____/
The views expressed are my own. \/____/
------------------------------------------------------------------------