[SI-LIST] : Termination for bi-directional lines

Poulet P. ([email protected])
Tue, 16 Jun 1998 12:20:21 -0700

This is a multi-part message in MIME format.
--------------3C2DAE3F40BF93149EFB9873
Content-Type: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Transfer-Encoding: 7bit

Dear Members,

I have read and found a lot about the different techniques in use to
terminate unidirectional line ( series, parallel, ac, diode, etc.). I
would like to find more specific information about terminating
bi-directional lines.
We need to interconnect two PCB and the transceiver characteristics on
each board are different.

Any reply will be greatly appreciated.

Thanks in advance,

--
Philippe Poulet
Hardware Engineer
RICOH Corp






--------------3C2DAE3F40BF93149EFB9873
Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for philippe  Poulet
Content-Disposition: attachment; filename="vcard.vcf"


begin:          vcard
fn:             philippe  Poulet
n:              Poulet;philippe 
org:            Ricoh Corporation
adr:            3001 Orchard Pkwy;;;San Jose;CA;95134;USA
email;internet: [email protected]
title:          Hardware Engineer
tel;work:       (408) 944-3347
tel;fax:        (408) 434-5390
x-mozilla-cpt:  ;0
x-mozilla-html: FALSE
end:            vcard




--------------3C2DAE3F40BF93149EFB9873--


**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more more help, put HELP.  si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****