Re: [SI-LIST] : Incorporating 3-d passive circuit models into SPICE

Salvador Iranzo ([email protected])
Thu, 30 Apr 1998 11:57:01 +0200 (MET DST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Art Collard: "Re: [SI-LIST] : Output Driver Impedance Variation?"
Previous message: Weber Chuang: "[SI-LIST] : Switching current and pull-down current"
Maybe in reply to: Mike Degerstrom: "[SI-LIST] : Incorporating 3-d passive circuit models into SPICE"

>
> > > Therefore, I am wondering if anyone has taken frequency measurements > such
> as s-parameters and found a reliable method to approximate the > poles and
> zeros? If so, do you use the Laplace approach mentioned by > Dmitri to
> incorporate the model into a transient circuit simulation? > > Mike
>
Here we did something similar to be able to use S-parameter data from HFSS
to create a PSpice model. Instead of finding the poles and zeroes it uses
behavioural devices to model the circuit's response.

An example can be found at:

http://wwwcae.cern.ch/Maxwell/exemin/2stripem/2stripem.html

Regards,
Salvador Iranzo
CERN

Next message: Art Collard: "Re: [SI-LIST] : Output Driver Impedance Variation?"
Previous message: Weber Chuang: "[SI-LIST] : Switching current and pull-down current"
Maybe in reply to: Mike Degerstrom: "[SI-LIST] : Incorporating 3-d passive circuit models into SPICE"