[SI-LIST] : Cross section geometry for the previous post on inductance

Lidu Huang ([email protected])
Tue, 21 Apr 1998 14:01:25 -0400

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Andrew Ingraham: "RE: [SI-LIST] : Worst case VI curve for PCI spec a reality?"
Previous message: Raghu: "Re: [SI-LIST] : Inductance vs. frequency"

Thank you all for your great thoughts. Here is the cross
section geometry. The busbar is made of copper.

_____________
| |
|_____________| height = 0.11 mm

width = 0.43 mm

The busbar is about 15.6 mm long. It is treated as
isolated stand alone case. Mutual inductance is not
considered in this case.

Thank you for your attention and time!

Regards,

Lidu

Next message: Andrew Ingraham: "RE: [SI-LIST] : Worst case VI curve for PCI spec a reality?"
Previous message: Raghu: "Re: [SI-LIST] : Inductance vs. frequency"