[SI-LIST] : PCI Slew Rate Test Load

Chan, Michael ([email protected])
Wed, 8 Apr 1998 13:16:24 -0500

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Andrew Ingraham: "RE: [SI-LIST] : PCI Slew Rate Test Load"
Previous message: Kathy Breda: "[SI-LIST] : IBIS User Group minutes 3/19 - In future will only be sent to"

Hi:
Can anybody explains why the slew-rate test of PCI output buffer in PCI
spec. 2.1 uses 1Kohms to Vcc and 1Kohms to Gnd
in addition to 10pF cap. to Gnd ? I can understand the use of 10pF cap. in
the test set-up but I cannot understand why 1Kohms
resistors are being use? Any comment(s) are deeply appreciated.

Regards,
Michael Chan
Compaq Computer Corporation
20555 SH249 MS090403
Houston, TX 77070-2698
Tel: (281)518-9189

Next message: Andrew Ingraham: "RE: [SI-LIST] : PCI Slew Rate Test Load"
Previous message: Kathy Breda: "[SI-LIST] : IBIS User Group minutes 3/19 - In future will only be sent to"