Re: [SI-LIST] : Clock chip supply voltage

Kazi Hassan (khassan@pakhi)
Fri, 18 Jul 1997 14:44:24 -0700

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Jim McNamara: "[SI-LIST] : Backplane Analysis / GTL Technology"
Previous message: Andy Ingraham: "[SI-LIST] : Re: Connector pinout question"
Maybe in reply to: Kazi Hassan: "[SI-LIST] : Clock chip supply voltage"

Yes, LVE product line is 3.3V. But Motorola is coming
up with EP line which will function at around 2.4V. These
are low voltage version of LVE parts.

Thanks,
Kazi

> From [email protected] Fri Jul 18 08:47:30 1997
> Date: Fri, 18 Jul 1997 10:46:24 -0500
> From: [email protected] (Richard A. Schumacher)
> To: Kazi.Hassan@Eng
> Subject: Re: [SI-LIST] : Clock chip supply voltage
> Content-Length: 106
>
> >I want the Vcc of the clock chip to be 2.4V.
>
> Why? Isn't that a 3.3 V part?
>
> Regards,
> Richard Schumacher
>

Next message: Jim McNamara: "[SI-LIST] : Backplane Analysis / GTL Technology"
Previous message: Andy Ingraham: "[SI-LIST] : Re: Connector pinout question"
Maybe in reply to: Kazi Hassan: "[SI-LIST] : Clock chip supply voltage"