3.3V/5V planes

fabrizio zanella (fabrizio=zanella%Eng%[email protected])
Thu, 17 Jul 97 10:54:54 -0400

Stuart, I would recommend a more symmetrical stackup for your board with
one extra layer. With this stackup every signal layer references a ground
layer, and the board is more manufacturable.

1 -------------- top
2 -------------- signal
3 -------------- ground
4 --------------- +5V
5 --------------- signal
6 --------------- ground
7 --------------- signal
8 --------------- +3V
9 --------------- bottom

Regards,

Fabrizio Zanella
Sr. Design Engineer
Hardware Engineering
_/ _/ email:
[email protected]
_/_/_/_/ _/ _/ _/_/_/ _/ voice: (508) 435-1000 Ext.
4645
_/ _/_/ _/_/ _/ _/ Fax: (508) 435-8949
_/_/_/_/ _/ _/ _/ _/ _/_/_/
_/ _/ _/ _/ EMC Corporation
_/_/_/_/ _/ _/ _/_/_/ 171 South Street
Hopkinton, MA 01748-9103