______________________________ Reply Separator _________________________________
Subject: Controlled Impedance Connectors
Author: Non-HP-colin.campbell ([email protected]) at HP-Boise,mimegw2
Date: 3/20/97 12:15 AM
The current design that I am involved with requires the transfer of ECL clocks
and data ( probably differential ) at rates > 50MHz between two adjacent PCB's.
I therefore require to find a suitable controlled impedance connection system.
The problem is that the connectors must be surface mount and operate over the
military temperature range.
Can anyone help?
Regards
Colin Campbell
GEC Marconi Avionics
Scotland