[SI-LIST] : Any Veribest SI tool experiences?

Laurence Michaels ([email protected])
Thu, 16 Sep 1999 08:48:47 -0400

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Ingraham, Andrew: "[SI-LIST] : RE: Another decoupling question"
Previous message: Greim, Michael: "[SI-LIST] : RE: Another decoupling question"

I'm looking for info on the Veribest SI tool. Veribest employees need
not reply, except to correct any misconceptions or misrepresentations.

Has anyone used Veribest's SI tools (I'm betting "yes"), and if so, what
are your experiences with it?

Has anyone used Veribest CAD tools with Quad (aka Viewlogic)'s SI tools?

As a reminder, do not disclose proprietary information on this list, but
general information about problem size, difficulty for the average
non-SI electrical engineer to use, and any specific modeling
difficulties (outside of semiconductor vendor problems) would be most
welcome.

Thanks,

-- Laurence Michaels

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

Next message: Ingraham, Andrew: "[SI-LIST] : RE: Another decoupling question"
Previous message: Greim, Michael: "[SI-LIST] : RE: Another decoupling question"