[SI-LIST] : Re: Tektronix IPA-510 question

Dima Smolyansky ([email protected])
Wed, 1 Sep 1999 19:47:07 -0700

I believe that Tektronix IPA-510 supports only 2-port Enhanced Accuracy
measurements. Dual
(coupled strip) should require a 4-port calibration, which is not supported
in the IPA-510.

Sincerely,

-Dima
=================
Dima Smolyansky
Time Domain Analysis Systems, Inc.
7465 SW Elmwood St.
Portland, OR 97223
(503) 977-3629
(503) 804-7171 (mobile)
(503) 245-5684 (fax)
www.tdasystems.com
The Interconnect Modeling Company (TM)

-----Original Message-----
From: Eric B. Lewis <[email protected]>
To: [email protected] <[email protected]>
Cc: SI-List <[email protected]>
Date: Wednesday, September 01, 1999 6:59 PM
Subject: Tektronix IPA-510 question

>Could anyone provide me with the Enhanced Accuracy TDR/TDT measurement
>process (calibration)
>for the Tektronix IPA-510 for a dual (coupled) strip. The instruction
>manual details how to do this for
>a 50 ohm micro strip, but no other type of trace.
>
>Thanks,
>
>--
>Eric B. Lewis
>[email protected]
>Raytheon Systems Company
>13510 N. Central Expressway
>Dallas, TX 75243-1108
>972-344-2983 Work
>972-598-3852 Pager
>
>

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****