Re: [SI-LIST] : OVERSHOOT/MAX. VOLTAGE RATING

Scott McMorrow ([email protected])
Wed, 21 Jul 1999 13:14:50 -0700

Jim,

[email protected] wrote:

>
> Why do we not see Maximum AC Operating Conditions in current data sheets?
>
>

This is a good question. It would be nice to have some sort of
maximum energy over a particular voltage, since the problem is
a time/voltage(current) phenonemon.

It would also be nice to have a decent way of specifying the
sensitivity of an input to high frequency energy such as noise
and glitches in the threshold region. The Pentium Pro/PII/PIII
specs from Intel take a stab at this. The spec, however, is
a bit kludgey.

regards,

scott

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****